Andover TownCentral Homepage
Forum Home Forum Home > ANDOVER FORUM > HELP
  New Posts New Posts
  FAQ FAQ  Forum Search   Register Register  Login Login

bond pipe

 Post Reply Post Reply
  Topic Search Topic Search  Topic Options Topic Options
Qizhenbi View Drop Down
Forum Newbie
Forum Newbie

Joined: 08 Jun 2017
Online Status: Offline
Posts: 31
  Quote Qizhenbi Quote  Post ReplyReply Direct Link To This Post Topic: bond pipe
    Posted: 02 Aug 2017 at 11:01
Plastic pipe fittings how to bond pipe, pipe fittings before bonding, the application of dry cloth will be the mouth side of the mouth and the mouth of the wipe treatment, when the surface sticky oil must be wiped with acetone clean.plastic wood panel supplier Aruba
Pipe section should be flat, vertical tube axis and chamfering; bonding should be painted before the mark line and try to insert, try to insert the depth can only be inserted into the original depth of 1/3 to 1/2, It is strictly forbidden to use the bonding method.outside design china with outsie decking
Apply the adhesive, you should first apply the inside of the socket, after the application of the outer side of the socket, apply the socket should be axially from the inside out evenly applied amount, not leakage or excessive coating. After the adhesive is applied, it is advisable to keep the applied external force within 1 minute, keeping the straightness and position of the interface correct.outside railings for concrete steps
After the bonding is completed in time to squeeze out the excess adhesive wipe, in the curing time shall not be forced or forced to load. The adhesive joint shall not be constructed in rain or in water and shall not operate at or below 5 ° C. Connection procedure: preparation → cleaning work surface → trial plug → brush adhesive → adhesive → maintenance.wood stain outdoor decking
Back to Top
 Post Reply Post Reply

Forum Jump Forum Permissions View Drop Down

This page was generated in 0.032 seconds.